About bunjiega

bunjiega · 01-25-2024

Was curious if anyone has an example or any success with using JSON to interact with the UCCX REST API.I am following this guide: https://developer.cisco.com/docs/contact-center-express/#!modify-application/modify-application It says it supports both...

bunjiega · 11-03-2023

Is there something basic I am missing with any of these EEM scripts? I can't get any of them to work. I have tried on a physical 7k and two virtual 9k's running different code.Here is a basic example of where I don't see any syslog being generated:NX...

bunjiega · 10-31-2023

I am mocking up putting an HA-Firewall (FTD) pair into a fabric.I am taking the eBGP approach, building a BGP session to the loopback of each VTEP. (see attached diagram)There are no vPC devices.The BGP Session to VTEP 3 comes up just fine, but the B...

bunjiega · 01-20-2023

I am trying to use the NDFC API to create some networks (I have a lot to create and am trying to automate).Creating networks from the GUI is straightforward. (In the fabric -> Actions -> Create Network)But from the API, I basically can't figure out h...

bunjiega · 12-20-2022

Is there a trick to getting POAP working on NDFC when the switch mgmt0 network is reachable over L3 to the ND mgmt network? I have tried everything that all the guides say.....This is the briefing of what my network looks like:I DO have a route added...

bunjiega · 01-26-2024

Thank you for this idea Elliot, I'll have to try this out.

bunjiega · 01-26-2024

Thanks for the conformation on both.

bunjiega · 11-04-2023

Thanks f00z - Looks like I did accidentally leave out the neighbor there. Did get the route-map one working, which was the main one I was concerned with. Thanks!!

bunjiega · 11-01-2023

Ended up getting it to work by going back and using 9.x Nexus code - no other changes. I was on 10.2.4. Maybe its fixed in 10.2.6? But feel better knowing it wasn't a config thing. Thanks for the input.

bunjiega · 10-31-2023

Yes, ASA1->NX3->NX1->NX4For simplicity you can ignore ASA2, that will only take over these BGP sessions during a failover scenario.

Member Since	‎11-06-2011 01:22 PM
Date Last Visited	‎04-24-2024 12:05 AM
Posts	58
Total Helpful Votes Received	33

User Statistics

User Activity

Python Using JSON API to UCCX

Nexus EEM Script not working

Firewall Insertion 2nd BGP connection not coming up.

NDFC API for Network Creation

NDFC POAP over L3

Re: Python Using JSON API to UCCX

Re: Python Using JSON API to UCCX

Re: Nexus EEM Script not working

Re: Firewall Insertion 2nd BGP connection not coming up.

Re: Firewall Insertion 2nd BGP connection not coming up.