About Daniel Brown

Daniel Brown · 01-06-2014

Hi,Most of the documentation I've found on this subject deals with 1 ASA with multiple ISP connections. Here is my scenario -192.168.0.1/24 - ASA1 - ISP1 - \ ----- site to site VPN ------ ISP - ASARemot...

Daniel Brown · 12-16-2013

Hi,I recently installed a 3750 switch and cannot telnet to it from any workstation. However, I can telnet to the new 3750 from another 3750 switch stack.My workstation can ping the switch and the switch can ping my workstation. Same holds through for...

Daniel Brown · 09-12-2013

Our primary ACS VM appliance has begun bootlooping with no real explanation available from our logs or TAC exploration. Luckily we have a secondary server picking up authorizations right now. However, I cannot promote this secondary server to primary...

Daniel Brown · 01-17-2013

We're in the process of upgrading our wireless controllers and just doing a general clean up of our wireless envrionment. Currently we do MAC filtering through ACS with a built in database. The version of ACS is antiquated so we are looking for repla...

Daniel Brown · 11-29-2012

We have approximately 150 1142 LWAPP's deployed in our facility. Recently we started getting complaints about speed issues (90% are using G 10% N). Upon investigating we found that the speeds are flucuating rapidly. Everything from 54Mbps down to 1Mb...

Daniel Brown · 12-17-2013

Thank you, this led me in the right direction. The switch is running OSPF. In my configuration of passive-interfaces I forgot to exclude the interface vlan1. Once I added that as an exclusion, I was able to telnet to the switch.

Daniel Brown · 12-16-2013

Hi Glen,Switch side:interface GigabitEthernet1/0/23 description Core switchport trunk encapsulation dot1q switchport trunk allowed vlan 1 switchport mode trunk channel-group 1 mode on!interface GigabitEthernet1/0/24 description Core switchport trunk ...

Daniel Brown · 12-03-2012

Thanks for the reply. Unfortunately that was standing right next to an AP. I'll need to do like you said and map the MAC to an AP and see what is reading from where.Also, I learned today that I cannot disable the B rates as we have 200 propretairy de...

Daniel Brown · 11-30-2012

I've been doing some data collection today. Although I cannot recreate the issue (go figure) perhaps this graph from inSSIDer will give some details?

Daniel Brown · 11-30-2012

I'm willing to disable the speeds (will probably wait until Monday, though) however the clients are connecting at 54mbps (usually) and then bouncing back and forth after a connection is made. My understanding of the speed settings were that a client ...

Member Since	‎10-15-2012 07:41 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	13

User Statistics

User Activity

Site-to-Site VPN with Dual Peers

Cannot Telnet to Switch from Client

Primary ACS v5.4 Server Started Bootlooping, Cannot Promote Secondary Server

MAC Filtering Options

Wireless Speeds Flucuating

Re: Cannot Telnet to Switch from Client

Cannot Telnet to Switch from Client

Wireless Speeds Flucuating

Wireless Speeds Flucuating

Wireless Speeds Flucuating