About mostafa ouamou

mostafa ouamou · 10-30-2016

Hello, I have two C6509-E with Sup2T. I converted each one to VSS mode separately.I want to know the impact or what will be happen if i connected them through the VSL. The configuration file " Interface numbering" in the both device is not synchroni...

mostafa ouamou · 10-02-2013

Hi allI came in today to find that most of the players on DMM are status down.DMM version: 5.2.2DMPs version: 5.2.3after checking I notice that the certificate installed in all DMP are expired.Can you show me how can I fix the issue?Thanks.

mostafa ouamou · 03-18-2013

Hi all,I use EAP-FAST in my network and I have some questions about it.1) is there any vulnerability detected with EAP-FAST?2) Can I restrict the establishment two or more simultaneous sessions using the same account and same PAC? how3) Can I use EAP...

mostafa ouamou · 11-03-2012

HiI have two C2851 + nme-wae-502-K9 and it the first time that I work with WAAS.Can you help me and show me how to setting up?1) How to connect the WAE and intercept traffic from the LAN <==> WAN?2) I need the CM to optimise the traffic or I can do w...

mostafa ouamou · 05-29-2012

Hi all,I deployed wireless mesh with 3 RAP and 1 MAP (AIR-LAP1522AG-E-K9 with 4 antenna) + WLC 2504.The AIR-ANT2480V-N are instelled on pole from a height of 17-15 m.I noticed that I can't get a good signal (front of antenna between 40m to 60m I got ...

mostafa ouamou · 10-30-2016

Hello, The both switchs had already converted to vss but are not synchronized each one had its new interface numbering switch 1 (gig 1/1/1) swich 2 (2/1/1) therefore the switch 1 is in production am afraid that when I connect the switch 2 its config ...

mostafa ouamou · 10-30-2016

Hello, thanks for your response, Both switch are configured as vss but they never synchronize the configuration so one of them is in production I want to know if I activate the VSL which one will be reload and which config will be override, Thanks.

mostafa ouamou · 10-04-2013

ThanksI resolved the problem yesterday by upgrading and patch 5.2.3.I want know how much time the patch still valid or I must upgrade to last version?

mostafa ouamou · 10-03-2013

thanksI want now if I need to reload the DMPs after installing the patch on DMM ?

mostafa ouamou · 10-02-2013

Thanks for your replyBut wich patch I will do : the 5.2.2 or 5.2.3 patchorI need to do upgrade to last version of DMM and DUMP if yes how can I do it for all DMP automatically?Best Regards.

Member Since	‎08-10-2010 01:15 PM
Date Last Visited	‎04-03-2018 02:32 PM
Posts	22

User Statistics

User Activity

Converssion to VSS

DMPs status down on DMM

EAP-FAST Security level

WAAS Express design

help about 1522AG

Hello,

Hello,

Re: DMPs status down on DMM

Re: DMPs status down on DMM

DMPs status down on DMM