About richardj

richardj · 03-08-2013

I am having problems getting Vlan's and routing to work correctly on a Cisco SG300-10MP switch for an IP Phone and Data system.System is operational but devices on subnet 1 cannot access subnet 2 and subnet 2 cannot access subnet 1.I have tried sever...

richardj · 07-06-2014

JJoyce,It appears you have your destination and gateway addresses in the E2500 swopped.The gateway address must always be on the same subnet/vlan as the devices are physically connected.Secondly the destination address must always end in a 0 if it po...

richardj · 06-23-2014

JJoyce,You are on the right track, it took me a lot of trials and different configurations to get it right.The SG300 is also sensitive to the methodology and the sequence of setting up the layer and vlan addresses.I found the most reliable method was...

richardj · 03-20-2013

Hi Tom, I tried the setup you recommended without the router, but no inter vlan communications in either direction. However in digging deeper I discovered that the switch interprets the VLAN 2 address of 10.0.3.101 irrespective of the...

richardj · 03-20-2013

Hi Tom,Unfortunately still not working.Here is what I have currently setup.Host 1 IP address 192.168.1.100 mask 255.255.255.0 Gateway Address 192.168.1.1 Connected to Port 1 as Trunk with Vlan 1 untagged and Vlan 2 tagged...

richardj · 03-20-2013

Hi Dave,The explanation is great, unfortunately I cannot get either of the first two scenarios to work.I have two Windows 7 workstations set up as the hosts, with their gateway addresses set to point to the respective VLAN address on the switch.I ha...

Member Since	‎03-08-2013 12:50 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	6
Total Helpful Votes Received	15

User Statistics

User Activity

Problem with Vlan's and routing on SG300-10MP switch

JJoyce,It appears you have

JJoyce,You are on the right

Re: Cisco SG300-10 - How to set up Inter VLAN routing.

Cisco SG300-10 - How to set up Inter VLAN routing.

Cisco SG300-10 - How to set up Inter VLAN routing.