Hi ASA configuration looks clean.No DHCP on ASAwould suggest to apply captures on DHCP client and server to  check the DORA process for DHCP. ASA wont be interfering in DHCP process here, to verify further please paste "show tech" and "show run all s...

HiWhat software version are you using ?As 8.3 and above wont require NAT for this to work.Please post the current configuration of ASACheersNaveen

Hi Johnny,The Ip addresses that we assign in failover are for active and standby unit, they are not assigned as primary and secondary units.So as the role of a unit in the failover pair changes the IP addresses and the MAC also changes accrodingly.So...

Hi Denis,     I agree with Jouni on this why would you need to establish VPN for internal resources when you can directly access them internally. Logically that defeats the purpose of VPN.To add if you want to access Clientless VPN from internal netw...

Hi,Try formatting the flash and load the image again as the procedure that you are using is correct, it's an issue with either image itself or the flash where you are storing it.Though it looks to me that its an issue with image.Hope it helpsCheers,N...