About Sergii Shcherbynin

Sergii Shcherbynin · 12-05-2013

Hello,What is WEBEX-UWL-S-PAK license?What are the differences between the WEBEX-UWL-S-PAK and WEBEX-UWL-P-PAK?

Sergii Shcherbynin · 09-04-2013

Hello,For example, we have CUCM 9.1 and 2 divisions: - Division1 with Network_Subnet1 and extensions 1XXX - Division2 with Network_Subnet2 and extensions 2XXXHow can I allow registration of phones with extensions 1XXX (or Device Pool DP_Div1)...

Sergii Shcherbynin · 03-21-2013

Hello,How can I change default settings for new phones in CUCM 9.1?I can override these settings in “System/Enterprise Phone Configuration” and “Device/Device Settings/Common Phone Profiles”, but how can I change settings which used for creating new ...

Sergii Shcherbynin · 12-12-2012

Hello,I have configured anyconnect for phone at ASA 5510. Phone can connect to Corporate network through VPN from outside without any problem.If I connect laptop to PC port at phone, I can run anyconnect client at pc and get vpn connection through ph...

Sergii Shcherbynin · 04-09-2015

I had this issue too.You should add following roles to AXL user for CUCM 10.5 to avoid this issue.Standard CCMADMIN AdministrationStandard SERVICEABILITY Administration

Sergii Shcherbynin · 07-30-2014

To order Jabber Guest, you must order the $0 part number under UCL or CUWL Standard or PRO at the http://cisco.com/go/ccw . Dedicated Expressway C and Expressway E are also required.Order at least 2 Rich Media Sessions since one is required on the E...

Sergii Shcherbynin · 12-19-2013

Or on Jabber for windows new relese 9.6?

Sergii Shcherbynin · 09-04-2013

We have phones with extensions 2XXX in Network_Subnet2 and they have calling privileges.

Sergii Shcherbynin · 09-04-2013

We have phones with extensions 2XXX in Network_Subnet2 and option 150 for them.

Member Since	‎07-12-2011 12:15 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	13
Total Helpful Votes Received	30

User Statistics

User Activity

WEBEX-UWL-S-PAK license

CUCM. Allow phone registration only from specific subnet

CUCM 9.1, Default settings for new phones

VPN Connection through Phone without anyconnect client.

I had this issue too.

To order Jabber Guest, you

Jabber for windows support FAC to CALL

CUCM. Allow phone registration only from specific subnet

CUCM. Allow phone registration only from specific subnet