About jthomp7626

jthomp7626 · 11-22-2021

Which Nexus NX-OS version will support 256 bit AES?

jthomp7626 · 07-09-2019

We have ASAs with three security contexts. We have one ISE appliance for TACACS+. Our MGMT context and ISE are routed on MGMT network. Our other two contexts are on different networks. How do we point our other two contexts to our ISE appliance via ...

jthomp7626 · 01-08-2014

Hello,I am trying to see if the following can work. access-list extended Out permit udp host 239.10.10.1 range 1020 1030 anyaccess-list extended In permit udp any host 239.10.10.1 range 1020 1030int vlan 10 ip access-group Out out ...

jthomp7626 · 12-19-2013

Hello,I have an Enhanced FlexWan module in an 6506e chassis with SUP 720. The modules in slot 3 & 4 have no power. Thru show mod i see pwr down and diag unknown. I issue power enable mod 3 & 4 still no change. I put them in another...

jthomp7626 · 07-25-2012

Hi,I am trying to limit the bw of a gre tunnel to 60Mbps and any packets exceed this rate drop them. Problem it seems is you cannot apply a Service-policy output <word> to logical interfaces. So below seems to be the only option:vlan configuraiton 93...

jthomp7626 · 07-09-2019

Thank you Mike. Will try and get back to you.

jthomp7626 · 06-05-2012

Thanks much it worked!

jthomp7626 · 06-05-2012

Thanks much it worked!

jthomp7626 · 06-04-2012

Thank you. I will try this and let you know.

jthomp7626 · 06-04-2012

Thank you I will try this and let you know.

Member Since	‎06-11-2007 07:12 AM
Date Last Visited	‎11-29-2021 10:45 AM
Posts	25

User Statistics

User Activity

NEXUS AES 256 Bit

ASA Three Security Context to ISE Appliance for TACACS+

NACLs and Multicast

Enhanced FlexWan Module

Rate Limit GRE Tunnel on 6500 Sup 720

Re: ASA Three Security Context to ISE Appliance for TACACS+

Re: ACS 1121 Patch10

Re: ACS 1121 Patch10

Re: ACS 1121 Patch10

Re: ACS 1121 Patch10