Acerca de 3cxcisco08

3cxcisco08 · 11-25-2014

Hello Guys,I made a XML application which runs just fine on a SPA 525 but not on the SPA 502 (have not tested on other 50X phones).The issue is that the URL I return in a MenuItem for the tag <url> gets cut by the phone when it request it.The Flow is...

3cxcisco08 · 03-21-2013

Hello All,in the latest firmware i have the issue that some phones do not load there lang file and use it.the web interface stated "Deutsch" (german) for example bit the phone has chosen Italian.I can not replicate this at any time but i found "Local...

Check-Sync to change Profile_Rule · 03-13-2013

Hello Guys,can i send to an Cisco SPA XXX a check sync with ua-profile?I need to update the prov. link from http://yyyyyyyyy/$MA to http://xxxxxxxxxx/$MAI know i could use an http get /resync with the new path but like to keep it to sip...

3cxcisco08 · 12-10-2012

Hello Forum,i am looking for a documentation about action url commands i can push or get from a web server.Unfo i could not find it. I have done once a dialer for the spa phones via push but needed the support of cisco to manage to do.Is there a pubi...

3cxcisco08 · 06-01-2012

Hello Community,how can i enable to dial # from a spa?I need to dial #20# but at the moment i see that the invite is even not send to the pbx.Also a numern like *20*XXXXXX# is send as *20*XXXXX (without the # at the end).Someone an idea? FW is 7.5.1 ...

3cxcisco08 · 03-22-2013

Hy Kerry,I have check further. The phones need to reboot just many many times until they change the lang.Also devices with SPA500S struggle a bit more to change the lang. Unplugging the S and it manges much better.I could not found why but anyway, go...

Check-Sync to change Profile_Rule · 03-21-2013

well there is ua-profile event bit it seams not to be supportet. happy using http....thx

3cxcisco08 · 06-06-2012

very simple[x*].

3cxcisco08 · 05-09-2011

due to the time difference allow me to post as well this question to this topic.1)Still, with the option enabled "Hold Target Before REFER:" no invite to hold the call is send by the phone. The documentation is aiming this function to work for attend...

3cxcisco08 · 05-09-2011

just checked the manual,Hold Target BeforeREFERControls whether to hold call leg with transfer target beforesending REFER to the transferee when initiating a fully-attendedcall transfer (where the transfer target has answered). Defaultvalue is “no,” ...

Miembro desde	‎11-18-2009 12:15 AM
Fecha de la última visita	‎08-18-2017 03:56 AM
Mensajes publicados	36

Estadísticas de usuario

Actividad del usuario

SPA 50X and XML Application URL

SPA Language

Check-Sync to change Profile_Rule

Cisco SPA 5XXG Action URL

SPA 50X and 525 can't dial "#"

SPA Language

Check-Sync to change Profile_Rule

SPA 50X and 525 can't dial "#"

Re: SPA 50XG - MOH on blind transfer

Re: SPA 50XG - MOH on blind transfer