Hi Gabriel,If you are trying to do NAT between the RLOCs on your xTR and your map server, you need an IOS version that supports info-request packets (look at the XB12 release)  for the control plane, and PxTR's are replaced with the concept of the RT...

We do this with LISP without BGP.router lisp locator-table default locator-set UPLINK priority 1 weight 50 priority 1 weight 50 priority 50 weight 50 priority 50 weight 50  exit ! eid-table default instance-id 0  database-mapping /24 locator-set U...

Thanks for the feedback!So, LISP is not L2 extension. It is a layer-3 solution.  Classically, you think of the hierarchy like this: an IP address is in a subnet and the subnet is attached to a gateway or gateways.  With LISP, the IP is associated wit...

LISP is supported and licensed along with OTV on the N7K.With OTV, you use FHRP filtering to address the egress traffic and then you can use LISP to address the ingress traffic. Otherwise, you will experience the classical "trombone routing" associat...

Hi Carlo,  Hi Bill.We are doing east-west DC moves today where east-west moves south of the firewalls are detected and trigger the event on the north side of the firewalls with LISP.  Its really cool!I need to spend some time next week documenting th...