Troubleshooting a paging intergration where the Paging port will hang off hook after the initial call is disconnected and the only way to fix is do a shut/no shut on the voice-port. The voice-port configuration isvoice-port 0/1/0 supervisory disconne...

(SCCP) --> CUCM 8.5 <---(SIP TRUNK)---> 3825 <---(PSTN)PRIJust brought up a new cluster in the UK and for all international calls I am receiving the same ring back no matter which country is dialed. All ringback is the UK ringback. If Germany is dial...

CUCM 8.5 Intergrated with CUE 8.5. I followed the guide for configuring CUE for CUCM and everything is working fine but one thing that has came up is when the Messages button is pressed the phone shows the call dialing the CTI port number and not "Vo...

So currently I am installing ESXi 4.1 on a C210 M2 series server. The basic install is completed and I am configuring the networking. I have two VLANs 10.1.152.0/24 (VLAN 152 Voice) and 10.1.153.0/24 (VLAN 153 Mgmt). The trouble I am having is I am u...