About paul.gordon

paul.gordon · 10-05-2016

Hi all, I have a question about joining new 1532E APs as MAPs to an existing RAP. The scenario is I have two buildings – Building A and Building B. Each building has a 1532E AP installed. Building A is connected to the WLC via the wired network. Bu...

paul.gordon · 03-14-2013

Hey Cisco,Can I please request that you produce a single, consolidated Configuration Guide PDF and Command Reference PDF for the Cisco Catalyst 3850, just like you do for the Catalyst 3750X?It's pretty annoying having to download 50 different smaller...

paul.gordon · 09-12-2004

I'm running ACS 3.3. I have a bunch of Catalyst 3550 and 3560 switches, some running IOS 12.1(19)EA1c and others running IOS 12.2(20)SE1.All are configured for TACACS+ as follows:aaa new-modelaaa authentication login default group tacacs+ lineaaa aut...

paul.gordon · 07-20-2004

According to CCO documentation, the following command should make a switch try doing 802.1x authentication for users. If that fails, the switch should fall back to doing no authentication. This prevents users from being locked out of the network if t...

paul.gordon · 10-06-2016

Hi Brett, I previously had it joined to the WLC via a temporary wired network to try and change it to Bridge mode, but it kept coming back up in FlexConnect mode, I think due to the bug in WLC software 8.0.120. Anyway, we'll see how it goes... wors...

paul.gordon · 10-05-2016

Hi Brett, Thanks for your response. That makes a lot of sense and it is what I was hoping would be the case. I had already configured the three things that you mentioned. The Building B AP is currently in FlexConnect mode due to a bug with the curr...

paul.gordon · 01-29-2014

I also came across Gen.IT about two years ago and have been very happy with it. Yes it does take a bit of work to get the spreadsheet templates up and running but the time invested here pays off dividends when your generating configs for lots of site...

paul.gordon · 12-15-2013

This is known IOS bug CSCuh55760 which is still open. I have upgraded my 3850s to the latest available IOS (3.3.1SE) and the bug is still there.

paul.gordon · 03-25-2013

I agree that an SFP-only model of the 3850 would be most useful, especially for smaller networks that are using the 3850 as a collapsed core/building distribution switch. Price-wise, a couple of stacked 3850s is a lot more attractive to most customer...

Member Since	‎05-21-2003 04:31 PM
Date Last Visited	‎10-11-2020 10:53 AM
Posts	15
Total Helpful Votes Received	1

User Statistics

User Activity

How to join a 1532E AP to a RAP via wireless

Consolidated configuration guide for Catalyst 3850

TACACS+ timeout value ignored

802.1x Fallback Authentication Doesn't Work

Hi Brett,

Hi Brett,

Generating network configurations for a large network roll-out.

3850 Incorrect Temperature in Fault Monitor

3850 SFP+ model?