I,m trying to use DNS-based ACL with pre-authentication ACL, in order to allow access to some URL's before the client will be authenticate by external captive portal without RADIUSIn the bug search web, ( https://tools.cisco.com/bugsearch/bug/CSCup98...
Hi, I have two WLC 8500 working in SSO and with nat enable feature configure in management interface. SSO is working, but i have to configure NAT before SSO becasuse when SSO is up, ip address and nat are greyed out in managemente interface. Some AP'...
Hi, i have one MSE 7.0, one WLC 7.6.120 and CPI 2.1. the AP's are 1602i and 3702i I had a map in CPI, showing my AP's, but i can't see associated clients, if i modify the client filter to all clients, they appear in the map, but for some reason when ...
ok, thnaks for your reply. Anyway, the procedure is not very clear. firts we upgrade the active supervisor with boht inserted in the chassis, when active supervisor reboots the standby becomes active, then the original active supervisor boots with th...
Hi, is not possible to upgrade both supervisors at the same time? Reading the steps, I have found the following: Upgrade Steps for Secondary SupervisorRemove supervisor from slot 5 which was upgraded in previous steps and insert the standby superviso...
it seens like DTLS connection can't be stablished between AP and WLC. The AP sends discovery requestthe WLC respond with two discovery responds, the firts one, contains the public ip address of the WLC and the second one contains the private ip addre...
Hi, thanks for your reply. Controller version is 7.6.120, and i have other 3702 already joined in the controller. this is not the problem.AP's are joining the WLC but they last a lot of time, 15 hours or more, without any action, suddenly they join. ...
