Hi all,we have an EX90 with TC7.3 software running.The system transmits outgoing no audio - both via the built-in mic, as well as via the handset on the touch panel, as well as the bluetooth connected Headset. Incoming audio through the speakers of t...
Hi team,a customer is using a lot of Transforms in VCS-C (X7.2) to reduce manual faulty dialing from endpoints and to force communication via SIP protocol.So for each new Cisco VC-EP (Profile and EX-Series) customer creates two new Transforms.(It's a...
Hi all,a customer runs a Edge 95 directly on a S-DSL Line - without any FW in front of it.The MXP also has some BRI connections.It seems that the system has been hacked and caused to dial out telephone numbers in south american area.What he can do ma...
Hi guys,my contact want's to know, if you can use a RC instead or beside the appendant TouchPanel of a EX60.Before you ask - I'm not able to say why he want's to use a RC.My idea was, that we don't have a OnScreen menu on the EX series - for that it'...
Hi team,we have a TCS (SW 5.2) with installed Premium Resolution Key. All bandwidths are checked at the Call Configuration (H.264 is also checked). I also checked the Recording Output relevant tabs (Large Media is checked etc.), but we only get recor...
In my case, it was due to the disabled root account on the ISDN link.
The update on the codec, as synonymous over SCP did not work with it.Only after the root account was enabled again the update could be executed.
Hi Amit,anything changed since last year?Currently one customer uses a manual list in TMS for IP AND ISDN dialing and he told me about this behaviour.They are running TC7.2.1 but also with my tested version TC7.3.3 there is no option to choose betwee...
Hi there,we have same issue and I realised, that this bug is also unfixed (continued) with newest sw version (S6.0.1). In addition we have a outtimed certificate on the server... The server ip address is already entered in the trusted site list of th...
We've had quite similar issue with VCS-C and VCS-E (X7.1) scenario.VCS-C is the registering clients against the AD, but all clients has to be proxied from the VCS-E to the VCS-C.VCS-E has no DNS Zone with any matching SearchRule (therefore there is a...
