About gridnutter

gridnutter · 03-26-2013

Hi,I am trying to lock down a Nexus 1110 to only allow specific hosts access via VTY.I have created the access-list, however there does not appear to be an option to apply the list to the VTY lines.Here is what I mean:IP access list SNMP_RO/SSH ...

gridnutter · 11-11-2010

I know that in 6.x you can rebuild a Publisher, restore the databse via DRS and the Subscribers will sync back up..However the DR Guide for 7.1 seems to suggest that Subscriber nodes also need to be restored from DRS after a Publisher has been rebuil...

gridnutter · 10-20-2010

All,I need to upgrade my customers Unity Connection 1.2(1) servers to 1.2(1)SR2, however to get there I need to first upgrade to 1.2(1)SR1.However the upgrade patch 1.2(1)SR1 is not available for download, so how do I get to 1.2(1)SR2?Any help apprec...

gridnutter · 02-24-2010

Hi,I have 2x 2951 Gateways each containing 2x VWIC2-2MFT-T1/E1 cards.Both cards on Gateway one will be H.323, so no problems there.However on Gateway two I need one card to be H.323, and the other card MGCP for connection to an Erricsson MD110.Can th...

gridnutter · 12-07-2009

Hi,Call Manager 6 platform.How can I block the Caller ID for 2 specific directory numbers when they dial any external number?

gridnutter · 11-11-2010

This section: Restoring the First Node only (Rebuilding the Publisher Alone)The title suggests no further action needed after rebuild...Section13 backs this up with: Restoring the first node restores the whole Cisco Unified Communications Manager dat...

gridnutter · 10-20-2010

Exactly right javalenc, I opened a TAC case and they published the SR1 update for me :-)Many ThanksCraig

gridnutter · 12-07-2009

I tried creating a new 9.@ route pattern and set the Caller ID to restrict. I then created a new CSS and Partition for the 2 phones. For some reason it seems that this route pattern is being used globally, and is restricting Caller ID for all phones...

Member Since	‎04-21-2005 03:42 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	8

User Statistics

User Activity

Nexus 1110 - How to restrict VTY access ?

Do I Need to Restore CUCM 7.1(3) Subscribers after Publisher Rebuild & Restore?

Unity Connection 1.2(1) upgrade to 1.2(1)SR2 - HOW??

H.323 & MGCP on the same Gateway - Is it posible?

Blocking External Caller ID for Specific DN's

Re: Do I Need to Restore CUCM 7.1(3) Subscribers after Publisher

Re: Unity Connection 1.2(1) upgrade to 1.2(1)SR2 - HOW??

Re: Blocking External Caller ID for Specific DN's