About arrayservices

arrayservices · 04-02-2014

Hello- I am looking at installing two N7K-F132XP-15 line cards, one in each of our N7K VPC peer switches. I have reviewed Cisco Hardware Installation Guide and it appears as though, with some common sense regarding static elecricity, the cards can b...

arrayservices · 02-07-2014

Hello everyone-I have an ASA-5585-SSP-10 that I have subinterfaces and VLANs created on. I used this ASA to firewall the vlans downstream on our Catalyst 4k's. Most all of my interfaces have specific ACLs in for the necessary traffic and all is good....

arrayservices · 11-01-2013

Hello everyone-I'm hoping someone can give me some assistance on a task I'm trying to accomplish with remote access VPN on an ASA5510. I am looking to configure remote VPN for 2 of our business partners. Each partner will need access to varying locat...

arrayservices · 10-30-2013

Hello, I am attempting an IOS upgrade on my Cat4k's. I've got two 4510R+E switches. I'm upgrading from 3.2.1.SG to 3.4.2.SG. As you can see below I've got 3.4.2 downloaded and stored in flash. The next step is to set the boot variable and reload. The...

arrayservices · 07-29-2013

Good morning all-I am working on an ASA 5510, running version 8.4. I am attempting something which I imagine would be straight forward, but having some issues.I am configuring connection profiles for both client and clientless VPN on the ASA. I would...

arrayservices · 02-07-2014

Jouni-How would you recommend I allow Intenet access outbound using ACLs in the ASA, without the any-any. We do not proxy to our web filter appliance, we have a Juniper firewall (external) which redirects 80 and 443 traffic to the web filter, it then...

arrayservices · 10-31-2013

Marvin-You got it. Once I saved the running config the correct boot variable is shown. I don't recall having to write the config on older platforms, the value would update immediately?Thank you Sir!

arrayservices · 10-30-2013

Hey Leo-I have yes, with "no boot system flash bootflash:cat4500e-universalk9.SPA.03.02.01.SG.150-2.SG1The command takes, but doesn't change the output of the "show bootvar", still displays 3.2.1

arrayservices · 07-29-2013

Jose-You've been a great help, thank you for clearing these questions up for me.Brian

arrayservices · 07-29-2013

Jose-One other question, if I were to send external clients in through https://remote.domain.com/access and keep all internal employees at https://remote.domain.com, how would I prevent external clients from logging in to the specific profiles if the...

Member Since	‎08-11-2009 06:54 AM
Date Last Visited	‎07-18-2018 12:03 AM
Posts	18

User Statistics

User Activity

Installing Nexus 7010 IO Module

ASA ACL Questions

Cisco ASA Remote Access VPN- Group URL

WS-C4510R+E

ASA IPSEC vs SSL VPN

ASA ACL Questions

WS-C4510R+E

WS-C4510R+E

Re: ASA IPSEC vs SSL VPN

Re: ASA IPSEC vs SSL VPN