About Clifton Fourie

Clifton Fourie · 10-10-2013

Hi Guys,I have a simular issue where is shows the status as active, not-in-use.What does this mean and how do I get this to be in use.This is a Controller with HA-SKU license.The licenses has been inherited from the Primary Controller.Any license on ...

Clifton Fourie · 09-19-2012

Good day,I tried using the EEM TCL scripting but with no luck as such. I'm going to try EEM Applet to fullfil this function.Any help would be appreciated on configuring this on C3750G and 6500 series switches.ThanksClifton Fourie

Clifton Fourie · 06-15-2012

Hi,I have used the two sl and tm scripts that was on the previous discussion but with no luck. I'm currently using IOS version 15.Please advise on how I can get this work on my c3750 and 6500.

Clifton Fourie · 06-15-2012

Hi,I have used the two sl and tm scripts that was on the previous discussion but with no luck. I'm currently using IOS version 15.Please advise on how I can get this work on my c3750 and 6500.

Clifton Fourie · 01-16-2012

Hi,I have two Cisco Location Appliances 2700 devices that has version 6.0.101.0 on. I'm having problems getting it to work. Anyone that can assist with this?Regards,Clifton Fourie.

Clifton Fourie · 10-10-2013

Hi Guys,I have a simular issue where is shows the status as active, not-in-use.What does this mean and how do I get this to be in use.This is a Controller with HA-SKU license. The licenses has been inherited from the Primary Controller. ...

Clifton Fourie · 02-13-2013

Hi Guys,I have upgraded to IOS version s3223-adventerprisek9_wan-mz.122-33.SXJ4.bin and since I upgraded the SSO is not working.The redundand Sup loads the IOS and when it tries complete the process it reboots the whole time. This is happening on 4 o...

Clifton Fourie · 06-18-2012

If I do "sho run". this is what is I see:event manager environment suspend_ports_days 30event manager environment suspend_ports_config flash:/susp_ports.datevent manager directory user policy "flash:/"event manager session cli username "fouriecl"eve...

Clifton Fourie · 06-18-2012

Hi,I have tried the same scripts and seem to experience the same results as mentioned above that it shows the ports are shutting down but it does not disable the ports. Please assist with this as I'm not clued up with TCL scipting as well.Thanks.

Clifton Fourie · 05-11-2012

HI Joe,I'm not that clued up on the EEM tcl scripting. I did try a few thing but with no luck.How do I apply the two scripts you added as I tried using the Cisco manual but with errors on the scripts.Your assistance would be highly appreciated.Regard...

Member Since	‎09-19-2011 12:06 AM
Date Last Visited	‎07-01-2021 02:11 PM
Posts	11

User Statistics

User Activity

Cisco 8510 WLC and RTU licence

using eem applet to Shut down inactive port longer than 30 days

Shutdown Ports not in use for a while with Scripts

Shutdown Ports not in use for a while with EEM Scripts

Is the Location appliance 2700 compatible with WCS 7.0.164.3?

wlc 8510 and licensing

6509 Supervisor 32 redundancy issue

Shutdown Ports not in use for a while with EEM Tcl

Shutdown Ports not in use for a while with EEM Tcl

Shut down ports not in use for a specified time frame