I have a Cisco 892 setup as a VPN client connecting to an ASA 5515-X. The tunnel works fine and comes up if theirs correct traffic. I have two RADIUS servers I want to use certificate based authentication to, that are located behind the ASA 5515-X....
So, I have a Cisco SR520W (Will be replaced by an ASA eventually) acting as a EZVPN Server, and a Cisco 861 acting as an EZVPN client. Also, I have a Cisco 2621 simulating the "Internet", with a virtual interfaces setup to simulate internet site...
I have 802.1X certificate authentication enabled on the computers. As described in my post above, authentication will work if theirs another device on the same VLAN that is connected to a port that bypasses authentication. It seems like I have a ch...
I have solved this, I have posted the relevent configs. I'm aware that the WAN ip address isn't valid, but I scrambled it to protect my identity http://pastebin.com/2LXuPr2chttp://pastebin.com/pRPujJbj
