About notinstock

notinstock · 12-12-2018

I had the same problem.... Did not have Call Manager service Running on my Publisher node so I never restarted it... The Spark Room Kit Plus showed registered. Even receives and places calls, but "none" for status/IP address. I found this article...

notinstock · 04-01-2018

Ensure that it is a FAT32 formatted USB.... Most of the larger USB sticks over 32gb are formatted with NTFS or something else from what I have seen. When I put a 256gb NTFS formatted USB in my router it did not recognize it and i had to find me a s...

notinstock · 03-26-2018

I would try the version of Denali as I am having some issue myself with Everest isr4300-universalk9.16.03.06.SPA.bin Load your image onto a FAT32 formatted USB stick and do the command: boot usb0:isr4300-universalk9.16.03.06.SPA.bin It may ask ...

notinstock · 11-18-2014

I just had a similar issue trying to upload a new firmware cop file and just tracked down the process and restarted the services associated with that process....From the CLI run "show process list"track down the process that is reporting the lock. I...

notinstock · 02-07-2014

I know this is way after the original post but for those that run across this post there is new information available. Cisco does support their "JUMP" method or flash cut to minimize risks and downtime to customers. Please see this address for info...

Member Since	‎09-16-2009 07:15 AM
Date Last Visited	‎11-20-2020 11:45 AM
Posts	6
Total Helpful Votes Received	115

User Statistics

User Activity

Re: Spark Room Kit Plus shows 'none' as status in CUCM, but it IS registered

Re: IOS wont boot (ISR4321)

Re: IOS wont boot (ISR4321)

I just had a similar issue

Termination of CUCM grace period