Hi, My company is using ezvpn to connect from branch (877) to hq (ASA5520). Everything is doing great but when I tried to establish ezvpn connection from Cisco2651XM (emergency using) to ASA5520 but it's surprisingly not working. I...
I have this concern too. My customer has Prime Infra 1.2 and wants to use IP SLA feature to monitor the traffic, so I try to fine IP SLA feature in PI 1.2 but can't find it. So I browse in Cisco website and it seems that Prime Infrastructure 1.2 does...
Hello Harish,I already reset the crypto map on the ASA, unfortunately it doesn't work, everything is still the same LOL. So I show crypto isa sa on the ASA and it shows37 IKE Peer: 180.180.122.69 Type : user Role : responder ...
Harish, LOL that's I'm going to do as well, reset crypto map on ASA. however it's gonna take time a little bit to do that. Get back to you with the output asap. By the way I have a question about xauth do we have to enter username and password a...
Harish, That's not a problem..I know it's kinda confusing LOL to me as well...*Mar 1 18:22:25.182: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is ON*Mar 1 18:22:25.182: ISAKMP: Created a peer struct for 203.170.236.194, peer port 500*Mar 1 18:22:26.624: ...
Harish,Here is my config after changingcrypto ipsec client ezvpn XXX_VPN connect auto group XXX_ezvpn key cisco123 mode network-extension peer 203.170.236.194 username admin password XXXXXX ---> also have it on global (must enter this unless can't e...
