Does C9124AXI-E -require a 9800 controller in bridge mode?

Hi I trying to reach a building on the same campus from the main site would 2xC9124AXI-E -combined with a 9800 controller and  AIR-ANT2413P2M-N directional antennas on the roofs at each building   provide wireless bridges up to 200 metres--  They use...

We are using Unity 11 --We want to remove the greeting completely, but when I try to do this navigating through the VM options and leave a silent greeting, the default greeting is set (the one that says “Sorry name isn’t available”) We want to remove...

We have replaced 2 x 7200 router s for ASR1001x but have come up with a problem can you verify that the ASR will do L2 pass-through on a sub-interface under the same parent interface as other L3 sub-interfaces ?   Can Cisco to confirm it is supported...

 We want to connect another companys 887 router into a 888 via the switch ports on both as we can apply our own HSRP, PBR and ACL policies to it. Will it do layer 3 via the switch ports. if i connect them together then i can forward to the lan layer ...