Hi Experts
Customer would like to utilise ISE Guest Self Registration with Aruba Wireless controller
They currently have Aruba AP345 AP's and controllers 7210 / 7240 running code 8.3.0.7
They already have ISE 2.4
Is there a documented guide for s...
Hi Folks,Has anyone deployed a wireless lan solution for guest access, where wired guests are also tunnelled back to the DMZ anchor controller, whereby these wired clients are then doing CWA to ISE?many thanksJason
For Customer RFP response - A customer would like to authenticate wireless users - which may be on laptops or smart devices (ipad/iphone and similar) and apply an AVC profile to a flexconnect wireless client.But for certain times of the day, then res...
Scott / Leo have give some good comments above.
if you have walked around with Ekahau and it's complaining that there's lots of interference, this could be due to the fact that the majority of the AP's are on pwr level 1 and could indeed be Co-channe...
Any reason why you have TPCv2 selected?
I suspect this is why most of your AP's will be at TX power level 1 or 2Typically, TPCv1 is recommended (previously TPCv2 was only advised under TAC guidance)I would suggest moving to TPCv1 and initialise your ...
If adding / moving AP's, its good practice to re-initialise the RRM DCA process.Try issuing the following command on the RF group leader: (Note, make sure you do this out of working hours, as all AP's will revert to default channel, as it this builds...
the 1552h is still available due to the requirement of some customers needing Class I, Div 2/Zone 2 certified, therefore will continue to be available.
If you do not need the Class I, Div 2/Zone 2 certification then you could use the latest range of ...