About thiago.dacruz

thiago.dacruz · 03-08-2013

Hello guys,I have 2 x Cisco 3845 each one with a DS3 circuit, both running c3845-spservicesk9-mz.124-15.T3. In each of them I have one pvc provided by my carrier and I received the following info to configure:vc-class atm ATM vbr-nrt 44096 44096 1 ...

thiago.dacruz · 02-21-2013

Hello guys,I have a few old 2600 routers (2621, different IOS's) which I'm now replacing for new one's from the 2900 series (2901, Version 15.1(4)M4).In my configuration I have two IP addresses in my LAN interface and I have HSRP configured within th...

thiago.dacruz · 03-28-2013

Paolo, I understood it, but then when Cisco allows me to configure up to 44209 they are incorrectly doing it?Regards,

thiago.dacruz · 03-28-2013

Hi Anil, I've upgraded the router to the IOS c3845-adventerprisek9-mz.124-15.T12, but I'm still facing the same issue.Regards,

thiago.dacruz · 03-11-2013

Paolo,This is what I got on the other router with the NM-ATM-DS3:router(config-vc-class)#vbr-nrt ? <64-44209> Peak Cell Rate(PCR) in Kbpsrouter(config-vc-class)#vbr-nrtI believe that 40700 would be the max throughput I will have, however the line r...

thiago.dacruz · 03-08-2013

Hi Anil,That's the only pvc I have configured. I tried to configure it directly under the pvc, got the same:router(config-if-atm-vc)#vbr-nrt ? <64-40700> Peak Cell Rate(PCR) in Kbpsrouter(config-if-atm-vc)#I'll update the IOS and will come back wit...

Member Since	‎02-21-2013 10:54 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	6

User Statistics

User Activity

Cisco 3845 - NM-1A-T3/E3 vs NM-ATM-DS3

HSRP on Secondary IP address - Cisco 2900

Cisco 3845 - NM-1A-T3/E3 vs NM-ATM-DS3

Cisco 3845 - NM-1A-T3/E3 vs NM-ATM-DS3

Re: Cisco 3845 - NM-1A-T3/E3 vs NM-ATM-DS3

Cisco 3845 - NM-1A-T3/E3 vs NM-ATM-DS3