I have been using sandboxapicdc.cisco.com for some Python, Ansible, Terraform, Postman testing. for a couple of weeks. Up until 16-Nov, it was working very well. Now it can take 30 minutes to run a simple scriptIs it wedged? Can it be rebooted
IntroductioniSCSI boot enables a server to boot its operating system from an iSCSI target machine located remotely over a network. This document provides details and tips on how to configure iSCSI boot. This document only covers the install part and ...
This video the basic configuration and use of the deferred maintenace (scheduler) feature in 1.4.1 and has an example of how to use it with a firmware upgrade.Please provide feedback and comments to help us better deliver this type of material.
IntroductionRelated Infromation IntroductionUCS 1.4.1 document covering C-series rack integration into UCSM. This covers the hardware requirements, configurations and show commands to setup C-series rack integration into UCSM.In the UCS (1.4.X) relea...
IntroductionThis document covers the enhancements to uploading new firmware bundles to UCSM 1.4.1 GUI. It also coverers the breaking up of the single UCSM bundle into:1) UCSM infrastructure (UCSM, IOM, FI)2) B-series bundles3) C-series bundlesVOD is ...
I've just tried to access the ACI always on in both normal and incognito mode and get a 404I first enabled the access for 8 hours, received an email that my session was ready (This is the always on, not the on-demand). But, nada
@bigevilbeard Yes, I would imagine that sandboxapicdc.cisco.com would much in demand. But, to drop off the cliff so suddenly and still be impacted a day later would seem to indicate maybe another issue is at hand
I'm trying to use a repository on Github using a local runner to run an ansible playbook. The playbook works fine ran locally, but via Github and a local runner, I receive this error:
Run dawidd6/action-ansible-playbook@v2
8/opt/pipx_bin/ansibl...
I found a work around, well, it worked for me. It was somewhere on CEC, but I can't find the link
When you create a meeting invite, put one of these in the Location:
@meet or @webex, or https://cisco.webex.com/meet/<your UID>
The webex details will...
Until Webex updates their plugin. You can disable "New Outlook" in the upper right hand corner of Outlook. You'll be able to use the webex plugin as before
