Hi All
FTD 3105 : the disk /dev/nvme1n1 is unable to be unlocked or reverted with the existing SED key
We have a new 3105, displaying the following message. When we proceed it reverts to the same screen.
After a couple of reboots, it shows the...
I am trying to get my head around this to make sure i've understood this correctly. Hopefully someone will be able to clarify it for me.
1. As per the below image, I can see that Balanced and security is enabled as a default for NAP in the default...
Hi All
where can we find the HyperV image for FMC version 7.2.5 (as this is the recommended version)
I had a look at the download options but the Hyper V image is not there.
Anyconnect is trying to connect to the VPN everytime a the users come into the office. Recently we've deployed Umbrella VAs and added the VAs IPs to the DHCP scope, so user's in the office are being directed towards the VAs.
- Within Anyconnect, we'...
We're trying to update the XML file in our ASA 5525 with 6 additional DNS server under Trusted network detection, out of the 4 out of the 6 firewalls worked, however our 5525x running 9.14(4)14.
After updating the DNS servers, then we try to open...
i edited the file via the ASA, Verified the file and the ASA confirmed it was valid
We were able to fix this, by downloading the XML file and adding the additional servers, and then re-uploading it.The errors are not there any more, but we're still ...
Apologies for the delay, we decided to split up the 192.168.0.0/16 into 192.168.0.1-192.168.0.255 as individual entries and 192.168.1.0-192.168.255.0 as individual entries. with one of the ip as a deny (this will provide local access)