About Gabriel Ruiz

Gabriel Ruiz · 02-18-2013

Hi, On the BE6K ordering guide (see link below), on the VCS section (page 14) reffers to a VCS ordering guide via a URL Link. http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/be_6000.pdfThat link appears to be b...

Gabriel Ruiz · 02-06-2013

Just wandering if this is currently possible:Remote Video Endpoint (Via SIP) =>ISP=> VCSe => VCSc => CUCM => 9971 The idea would be to allow the 9971's (or any Video IP Phone for that matters) to received a video call from the internet via URI. I und...

Gabriel Ruiz · 11-29-2011

I have the follwoing issue: Customer wants to migrate their current voice and web collaboration solution. They currently have MeetingPlace Express. Their current migration path is MP 8.5 + Webex. However they want it to be 100% on premises (no webex ...

Gabriel Ruiz · 06-27-2011

I have an issue with a 2911 Router w/ CUE. When I run the following command:service-module embbeded-service-engine 0/0 statusI get the following output:CPU FREQUENCY: 500MHzMemory Size: 256MBDisk Size: 0 MBI try to install the unity express software ...

Gabriel Ruiz · 08-19-2009

I have an ICT between 2 CCM clusters, below is the topology:CCM1 - 4500SW - Router - MPLS Cloud - Router - Router - CCM2Calls between call manages suddenly stopped working. I realized I cannot ping between call managers; however the call managers can...

Gabriel Ruiz · 10-08-2014

I know this is an old post but I have a similar requirement today. The documentation is contradictory at best and people from the BU have told me that the CUCM in BE6K is no different from the one on UC on UCS or BE7K and so long I stick to the limit...

Gabriel Ruiz · 02-19-2013

Thanks!!!!

Gabriel Ruiz · 01-11-2012

UC500 is not supported with the SPA8800 but configuration is very simple to setup and works fine. See the post below where someone posted a sample config.https://supportforums.cisco.com/thread/2074146

Gabriel Ruiz · 06-27-2011

Brand new system. Out of the box.

Gabriel Ruiz · 04-21-2011

Is this feature available? I found a cached document on the internet that on CME 4.2, SRTP was not available on the UC500.However we are currently on version 8.1 and documentation on the UC500 is not as complete as in other platforms.Has someone impl...

Member Since	‎08-10-2009 12:53 PM
Date Last Visited	‎05-26-2021 12:38 AM
Posts	22

User Statistics

User Activity

VCS Ordering Guide Link broken on BE6K Ordering guide

Outside Video call to 9971 using CUCM-VCS - is this possible?

Using MS Lync Server Live Meeting with Meetingplace Audio Only

CUE Module with zero Disk Space

CCM Intercluster trunk ping issue

I know this is an old post

VCS Ordering Guide Link broken on BE6K Ordering guide

New setup question on the UC320 and remote phone

CUE Module with zero Disk Space

Re: Activate srtp on Cisco sets.