Dear Expert,now i have some issue that i use portforwarding from outside to inside and DMZ to inside.now i have lap first from ASA e0/0 to PC1 (outside) and PC2 eth0/1 (inside) and PC3 eth0//2 (DMZ)from inside can ping to outside but outside cannot a...
Dear All,I would like to ask you about ASA 5510 (Active/Standby). i have two ASA 5510 and i did configuretion failover and it is working ( Active / Standby)buy my issue that when primary donw, the standby unit up to primary but the primary came back ...
Dear All,Does Cisco have hardware or Software that can cotrol performent Cisco router? i mean that can control like traffice,can telnet all the router if have around 50 router, can manage all cisco router?Best regards,Join
Dear All,i had ASA5505.last time when it start to rommon and i was configure tftp to flash in rommon already but when i start up and i show flash it didnot see please see info as below:ciscoasa# sh flaInitializing disk0: cache, please wait...Failed.N...
Dear Jaime,I use this Cisco Unity Express - Administration Version 8.0.5 .Note: i use Cisco C2951-CME-SRST/K9.I think jabber we need to order license but we did not order license.best Regards,SN
Dear Jaime,Could you more detail on this one?Cold i ask you other question that does Cisco has App ( Softphone) install on Iphone or Samsung?I mean that PC use Cisco IP Communicator and does has any app install on iphone and samsung?Best Regards,SN