About javdakker

javdakker · 03-26-2013

Hi there,I want to know if it is possible to reach a server via own WAN ip address on dialer, using a internal LAN device.So lets say Y is wan and X is LAN. I am a client in X i want to reach Y on port 80, not internal but external. so i browse to Y:...

javdakker · 02-15-2013

Hi,Is it possible to use a cisco router, in this case a cisco 887, to bridge an external ip address to a device behind the router?I need this because i only get 1 IP Address from my ISP and i want this IP address on my ASA.I was thinking of a bridge ...

javdakker · 10-16-2012

Hi there,I've got a problem with DHCP running on a cisco 1900 series router, 1921 to be precise. The Data VLAN works perfectly, i configured a ip helpder addressand its working. Problem tough is VLAN 20. This is the voice vlan. As u can see in the co...

javdakker · 09-27-2012

I have a question regarding an ATA 186. I want to connect this ATA 186 to a UC540 wich is on another location.We have a Cisco 887 on the remote location and i want to make a IP SEC tunnel between the UC540 and the 887.Is this possible? If yes can i g...

javdakker · 04-02-2013

Paul,That's not the problem. I allready did the NAT statements. and the server IS reachable from another external ip adres not port of this clients subnet. Only problem is from inside to outside and that outside routes back to inside.

javdakker · 04-02-2013

Hi Blau grana,Your post does not seem te relate to mine very well. And i still do not know how we can make this possible..The problem: Client has a server that can not be reached internally (security) thus must be reached from the outside..

javdakker · 02-16-2013

This has been solved, thanks alo for the input!

javdakker · 02-15-2013

Well its a dsl atm connection that means its a pppoa connection. I want to test this configuration with my pc connecting to the interface of the router.On my pc i can make a pppoe network and use the credentials of the ISP. Would this work or wouldnt...

javdakker · 02-15-2013

Hi John!Why would i need to create a BVI? And on a lan interface i can not issue bridge-group one, this has to be stated on the VLAN. So this would be more like: interface ATM0.1 no ip address no atm ilmi-keepalive bridge-group 11 pvc 0/33 encapsula...

Member Since	‎07-11-2012 11:03 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	12

User Statistics

User Activity

Reaching Server over own WAN trough own LAN

Using Cisco 887 as a "bridge" Device

1900 series router not giving out IP adresses

Connecting ATA186 to UC540 from remote location

Re: Reaching Server over own WAN trough own LAN

Reaching Server over own WAN trough own LAN

Using Cisco 887 as a "bridge" Device

Using Cisco 887 as a "bridge" Device

Using Cisco 887 as a "bridge" Device