My organization uses AnyConnect as the only option to work remotly. We have a Cisco ASA inside the corporate network that gives access to another very protected subnetwork. When we are on the corporate network, we have no issue as we can launch a sig...
Our client is requesting that when a call goes to voicemail and the person that is calling in dials "0" the call goes to the local operator. We do that in CUCM with calling search spaces and partitions. But in unity we have not been able to figure ou...
We will install a BE6000 v9 for a client that has asked for Attendant Console service. In the BE6k datasheet Attendant console appears as an optional application. What is needed to install attendant console? licenses? hardware? how does it integrate ...
Hi! Thanks in advance for your answers, I have a very basic networkign questionIf I have, say, 3750's (or any L3 switch, capable of routing) at the edge and a 4500 at the core, where should I route? At the edge? At the Core? Both?
I'm currently trying to setup teho (toll bypass) with a Call Manager 7.1 and 4 h.323 gateways, I need to do a lot of digit manipulation so I decided to make my voice gateways H.323 (instead of MGCP), but now it's turned out to be a real problem to ge...
Thank you for your answer, as I said we have no control over the corporate VPN (we are talking about a very large cooporation), so altering the first VPN or adding a new profile is not an option. I'm working on another solution with an alternate VPN ...
Partially answering my own question. I installed Shrew VPN. I established the first VPN (corporate VPN) with Anyconnect and then used Shrew VPN to launch the second VPN, it worked!....but, the second VPN is not setting up the routes for interesting t...
