alberto.orden

alberto.orden · 04-03-2013

Hi to all,I have a UCS-C220-M3 to install a MeetingPlace 8.5I have also two cards ( I already instal...

alberto.orden · 03-05-2013

Thanks Anand,And for the export from MPE 2.2 to MP 8.5 And the configuration of the router for MTPBe...

alberto.orden · 02-18-2013

Thanks a lot,Yes is for a lab, do you know the guide to read before install?Best regards,Alberto

alberto.orden · 02-15-2013

Thanks for the answers.But yes, there is a kit for this upgrade (CTS3010 --> TX9000)El part number e...

alberto.orden · 02-15-2013

Hi to all,Our customer wants to upgrade the TelePresence 3010 to TX9000 and has bought the kit.I don...

alberto.orden · 02-12-2013

Hi to all,We have already a CUCM cluster 7.1.5 with MeetingPlace Express 2.2 ( h323 )with 2 routers ...

alberto.orden · 07-10-2012

Hi to all,I want to upgrade the CTS1300 65 codec.CUCM version 8.6.2CTS 1300 version CTS_1.7.4(270)IP...

alberto.orden · 06-21-2012

Hi to all,Is there any posibility to have the Self View during a TelePresence?, I know that before w...

alberto.orden · 06-11-2012

Hi to all Can you confirm the cable specification to connect the Document Camera to the CODEC and wh...

alberto.orden · 06-11-2012

Hi,I am going to install a CTS1300 and IP Phone 7975 in a CUCM 8.6.1I download from Cisco this:cmter...

alberto.orden · 03-21-2012

Hi Gajanan,Thanks a lot.The mcs model is 7845H2Best regards,Alberto

alberto.orden · 03-21-2012

Hi to all,We want to migrate a client that has a cluster CUCM 6.1.5 with 4 78XX servers ( 1 PUB and ...

alberto.orden · 02-14-2012

Hi to everyone,I installed a CUCM 8.6.2 and have two endpoints MX200 and EX90, I download the softwa...

alberto.orden · 01-25-2012

Dear support,I have a CUC 7.1.5 cluster.When I try to configure the backup device on the Subscriber ...

alberto.orden · 12-04-2011

Hi to all,The customer is going to build the wall for the CTS 1300 65` and need to know the weight o...

Installation MeetingPlace 8.5