Hello I have been trying to join a new controller as a anchor to our primary WLC however I am getting Control and Data Path Down. When I run "debug mobility keep-alive enable" on the WLC I see messages stating that it cannot ping the anchor controlle...
We have a single user who is unable to share her screen. She gets the attached error. Trying to find what I can troubleshoot locally on the PC or on the CUPS side to figure out this problem.
Jabber:10.6.1 Build 55781
CUPS:10.5.2.22900-2
Thanks.
Hello,
We have a strange issue where intermittently (about 30-40% of the time) calls inbound from another PBX (that come in via a SIP trunk) are getting the wrong gateway from Call Manager so the calls do not connect correctly. Packet capture show t...
Hello,We are running Call Manager/Unity 9.1 with LDAP integration for the call manager end users and CUCM user integration for Unity mailboxes/users.We have an existing user that needs their extension updated. I updated LDAP and synced call manager s...
Hello Cisco Support Forums!I have a "simple" question regarding static routing on an ASA 5510 and metrics. I just want to confirm that if I add the following configuration that the Route 1 will take precedence over Route 2 due to the metric value bei...
Thanks for the response, this issue ended up being related to MTP resources, the reason for the intermittent problem was CUCM was running out then trying to use the gateway which was causing the issue.
