Hi, we have a Nexus 9508 with a 36-Port 40GE module (N9K-X9636PQ).The servers, with 10GE SFP+ optics, are too far to use the 5m passive breakout cable.Does the 40GE modules support the QSA module(CVR-QSFP-SFP10G) so that we can connect a 10GE SFP+ op...

Does the BVI have to be on the same subnet as the nodes on the Inside interface?We'd like to place the ASA between two routers with a /29 in between them and put the BVI on the same subnet.The servers would be behind one of the routers (L3 switch) on...

I try to SSH and get access denied.I try to ASDM and get "Unable to launch device manager from 172.16.252.100"I think I am missing something. Software is 8.4(5) and running in Transparent Mode.Inside/Outside are in bridge-group 1. No BVI is configure...

We have 9 x 3750x switches with 5-nonPOE and 5-POE.There is a limitation with 4 POE per stack with Stack Power.Can we combine all 9 to one stack since there are only 4 POE?Or, is the 4-switch limitation applied regardless if they are mixed with POE a...