Dear community, I was having several countries configured on a pair of WLC's. I know it is not optimal to have too much countries codes on the same WLC's, in order to reduce this I have a question : I see that for instance regulatory domain "E" cover...
Dear community,We are currently running on our 5508 WLC's the following Code : 7.4.121.0We are about to order the newest Aironet 2702i AP's, I heard that only since : 7.6.110.0 this AP is properly supported.Now I see two versions available : 7.6.110....
Dear all,
I have added a flow exporter from 2 wlc 5508 in direction of our Cisco Prime, under system / data sources i see data from my controllers coming but status is down.
Addtionally I cannot see under details dashboards the applications dashboa...
Is someone able to provide me which country codes are considerate as conflicting :I would like to ensure each controller we have is not using conflicting country codes.Thanks for your help
Hi,We would like to use a pair of WLCs in the DMZ to have the traffic of a specific SSID directly deported to the DMZ.This could look like as a Guest but in our case it would be more a BYOD deployment, allowing mobile devices to surf onto Internet bu...
Dear Scott, Thanks for your reply, so technically it won't a problem, it is more legal issue in your opinion ? Any ideas when Cisco could release this ? next 8.x version ? Thanks again
Dear Sir,Under controller > network routes, you can define routes when the WLC's are in DMZ and you are using the service-port to reach them.If the routes entered are too widely defined like a whole B or A Class this could affect the behavior of the ...
After more time in this issue without results,I opened a case to TAC, the engineer spent more than 2 hours with me in a webex without finding something else, the debugs are under investigations.Let's cross the fingers we can find out what's wrong her...
