About KARUPPUCHAMY MALAIYANDI

KARUPPUCHAMY MALAIYANDI · 08-20-2010

Hi All,I am configuring SNMP to monitor the status of EIGRP,But if the EIGRP neighborship is down the SNMP trap is not generated on the rotuer.I have tried to sniff the port as well and i am sure the traps are generated on the router.Can anyone help ...

KARUPPUCHAMY MALAIYANDI · 04-04-2013

Yes.. The above config will work...Thanks / Karuppu

KARUPPUCHAMY MALAIYANDI · 03-27-2013

can you paste the interface level ASA config.. is there any ACL applied on the interface.ThanksSamy

KARUPPUCHAMY MALAIYANDI · 11-29-2012

Here you gohttps://supportforums.cisco.com/thread/343363Thanks / Samy

KARUPPUCHAMY MALAIYANDI · 06-29-2012

Either you can use "MED" or AS_PATH.Thanks / Samy

KARUPPUCHAMY MALAIYANDI · 06-29-2012

If you are using single CE with multiple PE, then use the below config to do load balancing interface gi0/0ip address 10.10.10.1 255.255.255.252no ip route-cacheinterface gi0/1ip address 11.11.11.1 255.255.255.252no ip route-cacherouter bgp xneighbor...

Member Since	‎12-15-2009 01:13 AM
Date Last Visited	‎11-02-2017 11:57 PM
Posts	288
Total Helpful Votes Received	134

User Statistics

User Activity

EIGRP traps are not generating on the router

Implement site to site VPN

ASA static routing

Site to Site VPN issue

WAN Design

Re: WAN Design