About Gian Paolo

Gian Paolo · 09-12-2013

Hi,I'm writing a quick script to do an inventory of all the APs connected to a controller. I'm surprised not to find the Pri/Sec/Ter controller name in cLApEntry table while the IP address is there. Controller is 5508 with software 7.4.110.Where can ...

Gian Paolo · 04-04-2009

Hi all,I've installed four WLC 5.1.151.0 and the clients have roaming issues. When a client roams i can see it as "Mobility Role: Anchor" on the first WLC it connected and as "Mobility Role: Foreign" on the WLC it roamed to. The problem is after the ...

Gian Paolo · 05-22-2008

Hello,I've connected two sites witch a radio bridge (non Cisco).Now I'd like to implement QoS over the radio bridge using a couple of Cisco 800 series routers, 871 should work.My idea is: lan -- router -- radio -- radio -- router -- lanThe router are...

Gian Paolo · 05-22-2008

Hello,I'm getting this error even if the IP addresses used for NAT are correct, not network or a broadcast address.%PIX-3-305006: Regular translation creation failedMy platform:Cisco PIX Firewall Version 6.3(5)Cisco PIX Device Manager Version 3.0(4)M...

Gian Paolo · 05-22-2008

Hello,I'm configuring am ASA 5505 in tranparent mode. I'm tuning threat detection thresholds to reduce unuseful log messages.I type the following commands:no threat-detection rate scanning-threat rate-interval 600 average-rate 5 burst-rate 10threat-d...

Gian Paolo · 06-01-2018

I had the same issue, called TAC, fixed loading WCM certificate on the router. I share the procedure here in case anyone else has the same issue. On WCM show crypto certificate-detail admin Copy output (lines between BEGIN CERTIFICATE and END C...

Gian Paolo · 04-04-2013

Hi Mark,can you please be more clear about how you solved the issue? Thank you.

Gian Paolo · 02-23-2013

Hi Sivagami,what happens if the export destination is configured only for the aggregation cache but not for the main cache?ipv6 flow-export source Loopback0ipv6 flow-aggregation cache destination-prefix export version 9 export destination 1.1.1.1 111...

Gian Paolo · 10-12-2012

Have you found a solution? I'm starting to troubleshoot the same issue now.http://www.cisco.com/en/US/docs/wireless/technology/vowlan/troubleshooting/2_Gen_Troubleshooting_Guidelines.html#wp1054631

Gian Paolo · 05-30-2012

Hi,I'm searching the documentation to check if PBR with next hop tracking can work on C3750. This is the device I'm working on:WS-C3750G-12S 12.2(25)SED1 C3750-IPSERVICES-MThe current template is "aggregate routing" template.If I use ...

Member Since	‎10-15-2007 07:20 AM
Date Last Visited	‎11-09-2023 01:43 AM
Posts	21

User Statistics

User Activity

Controller name in SNMP cLApEntry

Client handoff and Roaming

QoS over radio bridge - with router 871

%PIX-3-305006: Regular translation creation failed

threat-detection rate scanning-threat

Re: WAAS AppNav-XE AppNav Cluster Wizard failing, no eligible interfaces

Unable to Track Clients - MSE 7.4 and PI 1.3

Re: Understanding IPv6 net-flow

One way audio with Alcatel IP Phones

Re: PBR on Switches (3750/3560)