Hello,
I have a WLC9800 with 9115 APs.For clients, I have a Vlan (100) mapped to an ssid. I want to add another vlan (102) mapped to the same ssid.I have added the vlan 102 (configuration, layer2, add vlan), i have created a vlan group and added both...
Hello,
I have a WLC9800 (OS 17.9.3) configured as new with the minisetup from the beggining of configuration.I want to use 2 subnets:192.168.10.0/24 (vlan 10) for management192.168.20.0/24 (vlan 20) for usersAt first setup, i have configured the ip19...
Hi,
I have a Cisco ASA FPR 1100 running with FDM. I had access via https. I have a vpn client profile, and i made some changes on Cisco Anyconnect vpn profile, meaning, that i have changed the local certificate with a public certificate, in orde...
Hi guys,
I have a 1702 AP that is connected to a wlc 2504 and works fine. I need to move the AP to a new controller, WLC-9800-CL with software version 17.3.6.
I have icmp and capwapp connectivity between AP and controller. This are the messages that...
Hello, I have WLC-CL_9800 in private cloud, OS version 17.6.4. I need to downgrade the OS to 17.3.6 because i need to join some 1700 and 2700 Access Points.
I have tried to downgrade the WLC via CLI and via Web, but after reboot, it keeps it`s origin...
Hi Scott, i have the same problem. If i create 2 policies, how can i map the two Policy Tag to the same Access Point?
I want a SSID to be mapped to two vlans.
Hello Balaj,
Thank you for you`re response. I have added the new vlan, add a vlan group (with both vlans). On tag, i have the policy profile attached.
On policy profile, i have selected one vlan, cannot add two vlan. I have tried to switch to vlan g...
Hello, seems that i have managed to gain access after rebooting the Cisco ASA. Access for https and ssh were there, just got stocked. Might be a bug or just they have to work in order to improve the GUI overall. Missed the old ASA....
Thank you @Rob ...
