Hi to all,
I need the secondary POE OUT Port on the C9124 in vlan 99
RAP switch config > trunk with native vlan 201 , which is my mgmt for my access points
RAP config > see picture 1
MAP config > see picture 2
I can ping RAP and MAP.
VLAN Transparen...
Hi to all I just want to connect the AIR-AP1562I-E-K9 to my C9800 controller. The Access Point comes in bridge mode but I need the AP in local or flex connect modeI do not want to change the mode on the cli because I have many of those. All AP´s sho...
Hello to all, which Access Points are supported with the the embedded wireless controller.Which access points can i connect to the EWC. Thanks in advance Regards Alex
Hi to all, just a short question.Hi to all We have a wireless controller and want to reach airprint services in the wired lan via wireless clients. Do we need multicast routing in our LAN or just bonjour gateway mdns on the controller. Of course, it...
Hi together,a customer has lost some Access Points to another WLC with 7.2 and then they come back after 15 minutes to the origin WLC with 7.5Attached the messagesMFP Protection is configured as optional152 Wed Nov 27 05:33:26 2013 MFP Anomaly Detec...
Hi to all are there any extra costs to install the EWC.Just need another software, right ? Without any additional costs C9100 EWC AP bundle image Thanks in advance Regards
Hi to all, here an output from release notes https://www.cisco.com/c/en/us/td/docs/wireless/controller/ewc/16-12/rel-notes/ewc-rn-16-12-2.html Subordinate APCisco Aironet 1540 SeriesCisco Aironet 1560 SeriesCisco Aironet 1815iCisco Aironet 1815wCisco...
Hi, thanks for quick answering. One more question.What about the service-Routing mdns Feature. I am completely lost with that feature. Any ideas. I thought I can use it instead of multicast routing https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/i...
Hi Inayaththanks for the link, but for my understanding is this for switches in standalone mode or with redundant supsBut I am looking for a VSS upgrade.Regards Alex
