About RENE SEGESSENMANN

RENE SEGESSENMANN · 08-27-2013

Hi allI like to tune the switchover timer for a SorryServer configuration. Actually the timer are set by default to 5 minutes.I like to tune the timer down to 1 minute. Is there a configuration option to change this default timer?Thanks for feedback.

RENE SEGESSENMANN · 11-21-2012

Hi all,I have a issue with a ACE configuration which terminate https traffic and load balance the client request to the real servers.All working fine, with one exception. If the client requests for the URL "https://www.myservice.com/content/" the con...

RENE SEGESSENMANN · 01-26-2012

Hi allAfter an upgrade from ACS 5.1 to 5.3 the view-logprocessor are not running any more.I also installed the newest patch 5.3.0.40.1. The installations are success but the view-logprocessor steal are not working.Someone have any suggestion to resol...

RENE SEGESSENMANN · 01-15-2007

Hi all,I like to know which devices support l2tpv3.Can anyone explain me which are supported or send me a link where I can find out.Many thanks,Rene

RENE SEGESSENMANN · 11-17-2006

Hello allHave a PIX with 6.3.4 running. Want to route traffic internal to a L3 device. Static route to inside are configured.route inside 10.57.7.0 255.255.255.0 10.57.1.3 1Default GW for internal devices are the PIX. If a device on inside tris to re...

RENE SEGESSENMANN · 09-02-2013

Hi Cesar,Thank you for your feedback.Yes, I refer axactly this timer. I do not find some informations to daly with this timer.Regards, Rene

RENE SEGESSENMANN · 11-26-2012

Hi Kanwal,I removed the parameter map from the policy-map multi-match.After this the configuration work as desired.Thank's for support and best regards,Rene

RENE SEGESSENMANN · 11-23-2012

Hi Cesar,Thank you for your answer.I tryed the wildcard entry also, without any success.I have tried to figure out the difference between policy-map type loadbalance http first-match and policy-map type loadbalance first-match.I used the example from...

RENE SEGESSENMANN · 11-23-2012

Hi Kanwal,I have tried your solution today without any success.The configuration are simple, but the result are always the same.client browser---------https--------ACE-------http---------rserverIf the client use the URL: https://this.is.a.request.com...

RENE SEGESSENMANN · 12-13-2011

Thanks for this excellent description of implementing IKEv2.If I made a change on the XML file on the ASA and I force the client to reconnect, I receive the error message below:***Function: CHttpSessionWinInet::handleServerCertErrorsFile: ..\Common\U...

Member Since	‎08-19-2001 01:05 PM
Date Last Visited	‎04-24-2018 11:37 PM
Posts	20
Total Helpful Votes Received	5

User Statistics

User Activity

ACE-4710 Timer tuning for SorryServer

ACE server response issue

ACS 5.3 view-logprocessor not monitored

L2TPv3 support

no route ro message (message nr 110001)

ACE-4710 Timer tuning for SorryServer

ACE server response issue

ACE server response issue

Re: ACE server response issue

Re: ASA Anyconnect IKEv2 configuration example