Folks,
Could you clarify the Below Query, we are deploying cisco 4503-E in VSS Mode for new site, we need to enable Jumbo Frames, in Particular ports Connecting to storage, is this switch module allows to configure jumbo frames per port based?
we...
Dear team,
we are installing a Newer CSPC Collector(2.7.4) to upload the Inventory to SNTC. Could you help to clarify the below Queries
1) We have Several 6500 , When we add this Device via SNMP, will it also add all The Line cards installed wi...
Hello GuysWe Are facing an issue with Duplex Match. error in nexus 5kOur Nexus 5k Switch continously throwing Duplex mismtach error on Logs.2013 Nov 9 07:53:24 FRMA_BK2_CSN5K_02 %CDP-4-DUPLEX_MISMATCH: Duplex mismatch discovered on Ethernet1/11, wit...
Hi Friends,We have been reported, in our network, our teleprescence device is rebooting very often. After the intial troubleshooting, it has been decided as Issue is occuring due to the lan Networki am doing an Lan Audit to find Any issue with La...
Hi FriendsWe Have an exsisting stack switch, with 3750G . i Need to add new 12 Port SFP switch to the exsisting stack.Exsisting stack switch software and ios Image is psted belowSwitch Ports Model SW Version SW Image------ --...
Hi Supriya,
Thanks for your Input. I Deleted the Old Inventory and added the New Inventory using new collector. But the Data Shows in SNTC dashboard is only half of what i see in CSPC collector. Half of the devices are missing in SNTC collector.
...
Hi Supriya,
We added all the sites and scheduled a Upload this Weekend(Waiting for firewall Rules to be applied). thanks for ur help.
Could you help to clairfy below query, we have a 5 year old inventory in SNTC tool already(which is done using o...
Thanks for your answer supriya.
i am currently planning to configure all sites(150+) one by one and Get them to Managed Device to verify and then plan to upload it to SNTC. Can I configure a Upload Profile to upload all the Data in managed Devices?...
Hi Chris,
I Added the WLC to CSPC, But i dont see the access Points in managed Devices. i Read it will be visible in SNTC. But is there a way we can see, whether access Points Details are gathered Properly in CSPC?
