Hello,i wonder myself if there is a white paper/example, which describe the implementation of multiple decentralized ISGs who are communicating to a central AAA server. Any help would be greatly appreciated.regardsEb
Hello, we are using an ASR 1002 for dynamic NAT (with route maps). I do have a Problem with the usage of the NAT pool it self.The total NAT Translations for the pool are:#sh ip nat stat[Id: 1] route-map natted-host-01 pool nat-pool-01 refcount 136 po...
Hi Acruzgreg,thanks for your config.I solved the problem with mine.It is not possible to have the same tunnel source interface in both tunnels.-----------------------OLD---------------------interface Tunnel0description DMVPN redtunnel source GigabitE...
Hi Acruzqreg,the config below is the one which is working on an 886 and not on the ASR (same config even the ip addresses).ip vrf bluerd 6207:20!ip vrf redrd 6207:10!!crypto isakmp policy 20encr 3desauthentication pre-sharegroup 2!crypto isakmp polic...
Hi Acruzgreq,i do have the same Issue like you. On an Cisco C886VA-W-E-K9 the configuration is working without any problems. But not an ASR 1001 and ASR 1002. Do you get any response from TAC so far?regards Ed
