About shahinfarid

shahinfarid · 12-30-2013

Hi Pros,I have a Cisco Linksys PAP2T-NA internet phone adapter which was working fine for almost a year. It suddendy stoped working and as I can see on the device power LED is blinking like this (---- O O ) means it's on for 2 ms and then blinking ra...

shahinfarid · 03-14-2013

I've found that my clients can NOT access to my ASA 5510 with their Cisco VPN Client Ver 5.0 through IPsec over UDP.By comparing my new running config with the old one I found some strang following configuration:svc enablegroup-policy DfltGrpPolicy a...

shahinfarid · 03-08-2013

I configured every thing in both site, there is a connection between my sites BUT I can't access my resources from SiteB with it has RV042.It also showes that it connected to my ASA in SiteA but there is no trafic between sites !!!I don't know what ...

shahinfarid · 03-15-2013

Good morning Portu,So many thanks. It works!Arash

shahinfarid · 03-14-2013

Thank You again, ciscoasa# show run isakmpcrypto isakmp enable Atriacrypto isakmp policy 30 authentication pre-share encryption 3des hash md5 group 1 lifetime 86400crypto isakmp policy 50 authentication pre-share encryption 3des hash sha group 2 life...

shahinfarid · 03-14-2013

Hi Portuquez,Thanks for your really quick respond. Here is the outputs:Group Description: Rcv'd: Group 2 Cfg'd: Group 1Mar 14 11:57:33 [IKEv1]: Phase 1 failure: Mismatched attribute types for classGroup Description: Rcv'd: Group 2 Cfg'd: Group ...

shahinfarid · 03-14-2013

Hi Sankar,How can I make some changes in my Backup files and restore it again.I want to remove my following configuration:svc enablegroup-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec What should I do ?

shahinfarid · 03-13-2013

Hi Auraza,I have ASA5510 Ver 8.2 and someone before me configured it as a VPN server for Cisco VPN Client Ver. 5.0.06 (IPSec Over UDP) I've tried to make a new SVC web-vpn (without any configuration now!) and after that nobody can access to my netwo...

Member Since	‎03-08-2013 12:15 PM
Date Last Visited	‎08-23-2018 01:48 PM
Posts	10
Total Helpful Votes Received	5

User Statistics

User Activity

Linksys PAP2T-NA Power LED is Blinking and adapter is not working

Get rid of the SVC enable

Site-to-Site VPN: Configure it between RV042 & ASA 5510

Re: Get rid of the SVC enable

Re: Get rid of the SVC enable

Re: Get rid of the SVC enable

ASA 5510 backup

What is difference between clientless and SVC web-vpn?