About weavermj1982

weavermj1982 · 07-18-2012

Hello fellow support forum members,Last week I posted an issue I was having where some Verifone chip and pin terminals were failing to negotiate at higher modem speeds. To resolve this, I enabled modem passthrough on our PRI gateway and configured a ...

weavermj1982 · 07-12-2012

Hi fellow community members,I have a very specific problem that I'd appreciate some help with if anyone else has experienced this or anything similar.We have a VG224 that provides analogue lines to mainly fax machines on our campus. Recently we have ...

weavermj1982 · 07-13-2012

Thanks Paolo.I've managed to get modem passthrough to work. Modem passthrough is not actually supported with SCCP at all. I had to set modem passthrough globally at the voice service voip level on the VG224, and also on a new voip dial peer which poi...

weavermj1982 · 07-12-2012

pri_gw#sh controllers e1E1 0/0/0 is up. Applique type is Channelized E1 - balanced Cablelength is Unknown Description: PSTN No alarms detected. alarm-trigger is not set Version info Firmware: 20090408, FPGA: 13, spm_count = 0 Framing is CRC4, ...

weavermj1982 · 03-16-2012

I had a similar problem last week doing a factory reset on a 7942 phone running SCCP42.9-1-1SR1S on a Call Manager Express 8.6 setup. Within CME the phone would just keep looking for term42.default and sit their loooping.To overcome the issue I conne...

weavermj1982 · 05-20-2011

Hi Andy,This thread is really useful to me. We have a 6.1(2)-1000-13 install (1 pub and 2 subs) that I want to step to 6.1(5). I'm going to try stepping the upgrade to 6.1(3b) first using the techniques you suggested RE firmware files in a lab/vmware...

weavermj1982 · 02-15-2011

Did anyone find a resolution to this bug? I need to bulk add services to around 800 phones.

Member Since	‎07-20-2007 07:43 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	12
Total Helpful Votes Received	4

User Statistics

User Activity

ATA186 fax issue when modem passthrough enabled on PRI gateway

VG224 and Verifone xx810 chip and pin terminal modem dialling

Re: VG224 and Verifone xx810 chip and pin terminal modem diallin

VG224 and Verifone xx810 chip and pin terminal modem dialling

hard reset killed cisco 7942

Re: Upgrade to CUCM 6.1(5) from 6.1x or 6.2x possible?

Re: Bulk Subscribed Phone Services CUCM 6.x