About Ryan Curry

Ryan Curry · 08-21-2018

Hi all, I have what I hope is a pretty simple question / issue. Just recently kicked off dot1x wired in monitor mode and I'm profiling phones, APs, and printers fine for the most part. In my policy, I have entries matching the endpoint profile that...

FMC 6.2.2 - Unknown Users · 01-24-2018

Alright experts, I need some assistance because this isn't making a lick of sense. I have a customer running FMC 6.2.2 and AD User Agent 2.3 that is having an issue where a lot of their connection events are showing Unkown under Initiator User. Som...

Ryan Curry · 08-14-2017

I have a customer that is looking to implement the collector for SNTC but they had a question that I don't know the answer to. They asked if they were to perform a code upgrade on a device that isn't covered under SmartNet, would it throw up a red f...

Ryan Curry · 06-28-2017

Hi all, I want to push the 8.3.121.0 code to my 5520 due to the 3802s playing nice with Aeroscout in this code version. Is anyone running this code on that platform and has it been stable? I told my organization that I wanted to wait at least a mon...

Ryan Curry · 04-12-2017

Hey all, I'm at a loss on this one - I've deployed a total of about 30 new 3802is over two floors of an existing campus (new construction connecting to existing campus). Aeroscout engineers are here to help configure some of their exciters and they ...

Ryan Curry · 03-11-2019

Sorry to drum up a year and a half old thread, but has anyone gotten the Flex Local Switching with Dynamic VLAN Assignment working? I've got a group of roughly 25 APs that are in a flex group where users are reporting no longer able to broadcast fro...

Re: FMC 6.2.2 - Unknown Users · 02-16-2018

So I was finally able to get a TAC engineer to work on the issue and after about 4 - 5 hours he was able to get the issue resolved I believe. I know there was a bunch of hocus pocus he was doing in the CLI, but we believe the gist of the issue is th...

Re: FMC 6.2.2 - Unknown Users · 01-25-2018

So I did some more testing and can see one of the users I'm having the issue with log in. Yet, when we do a test that hits a policy that should allow him through based on his ID it fails. When I go to look at the event it still shows "unknown user"...

Re: FMC 6.2.2 - Unknown Users · 01-25-2018

Yup, I'm getting a fair amount of users listed in there and most are discovered by passive authentication.

Re: FMC 6.2.2 - Unknown Users · 01-25-2018

Perfect, I'll check that out and see what I find. Thank you Philip!

Member Since	‎12-08-2009 07:33 AM
Date Last Visited	‎05-01-2020 12:15 AM
Posts	145
Total Helpful Votes Received	18

User Statistics

User Activity

ISE Profiling before Authorization

FMC 6.2.2 - Unknown Users

Question on SNTC and Inventory

WLC Code 8.3.121.0 on 5520 Experience

3802i Not Showing RFID Tags

Re: WLC Multicast and FlexConnect (rev. 2017)

Re: FMC 6.2.2 - Unknown Users

Re: FMC 6.2.2 - Unknown Users

Re: FMC 6.2.2 - Unknown Users

Re: FMC 6.2.2 - Unknown Users