Its been a while since you posted but open ldap is supported on UCSM.

When you initiate the connection from the server 10.10.197.114 then you need to apply the nat on vlan 17 and not 16. The nat is applied on the egress interface. nat dynamic 1 vlan 16 is for traffic destined on vlan 16. before it leaves it will source...

You can put it under the serverfarm. Like this policy-map type loadbalance http first-match L7_POLICY  class L7_CLASS    serverfarm SFARM1    nat dynamic 1 vlan 2xx serverfarm primarypolicy-map multi-match NAT_POLICY  class NAT_CLASS    loadbalance p...

HI Juan,What you have read is correct. If you are using 101 and 100 vlan in bridge mode then neither vlans can be used in any other context. if you can change the design to routed mode then you can create another context and reuse the vlan.This way y...