Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiI have been trying to search for any documentation that could guide in configuring an SCE to look for authentication information via ACS RADIUS. Any ideas ?Also, does the SCE have a feature to provide a logon page for users to enter their credentia...
Hi community,Does OSPF work between a VSS L3 MEC & an ASA Redundant Interface ?Physical Connections - 6509(Active) Port Gi 1/1/10 ------RJ-45------ Port Gi0/2 ASA 5520 v8.3.16509(Standby) Port Gi 2/1/10 ------RJ-45------ Port Gi0/3 ASA 5520 v8.3.1...
Hi Community,Scenario: HQ WAN Router already has a QoS Policy applied on its WAN port (30M link) [HQ has several branch sites and no issues with the rest of them except one branch. That one branch will be spoken about in this thread]Branch WAN Router...
Hi,I'm trying to configure an ASA 5520 with cut-through proxy feature. The user is required to be authenticated when trying to access an outside resource from the inside. This is a test lab before it is implemented in production. Following is the con...
Hi community,Just need some assistance to understand why smart install image upgrade fails coming via a Director (c3560) to clients (c3750X).Director Configuration (c3560)vstack director 192.168.100.254
vstack basic
vstack dhcp-localserver SmartUpg...
Unfortunately, the ASA is not on a contract so upgrade is not possible. Are you able to provide any documentation to back up your theory ?And I don't think there is any issue between VSS MEC and ASA Redundant interfaces, however OSPF protocol seems t...
Thanks for replying Reza. I used the ON mode to create the etherchannel on the VSS and since the ASA that I'm working on has the 8.3.1 software on it, etherchannel is not an available feature. Etherchannel on ASAs was introduced in 8.4+ versions henc...
EtherChannel load balancing (ECLB) is not supported between an IDSM-2 in the VSS active chassis and an IDSM-2 in the VSS standby chassis [ http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html#wp1138509(rea...
