Hi Expert,
I need your help expert opinions. we are building two new DC (Primary & Sec) with DC external boundary network. Diagram attached.
Primary DMZ with layer 3 hope running ospf and facing the provider using BGP and redistribut...
Hi All,
Quick question, Can you have MPLS in BO and Internet in HO ? How to implement IPsec tunnel between the HeadOffice Internet and the BranchOffice MPLS connection ?
Ideal situation will be to have either MPLS in HO and all BO's and ha...
Hi experts,
I have a remote site with 10MB Internet link connected to the HO via IPsec tunnel. Data copying through site to site tunnel gets dropped half way through, e.g if I am copying 2GB file it then gets stopped at 1.6GB, though ...
Hello experts! we have two nexus 9k core, attached to the HP Blade v7000 chasis and VPC configured. All Vlans are HSRP are configured. VPC is configured successfully. But the weird this is that source IP address 10.1.2.3 can ping the dest VIP (on the...
Hello experts! we have two nexus 9k core, attached to the HP Blade v7000 chasis and VPC configured. All Vlans are HSRP are configured. VPC is configured successfully. But the weird this is that source IP address 10.1.2.3 can ping the dest VIP (on the...
1. Yes, or the transit link in case of only MPLS WAN is down, if the whole Primary DC is down then yes .. DCI Interconnect link will be used.
2. Yes, No need to use tracking, if my Core router delete the primary route from its routing table, then it ...
Thanks Sam for your quick response.
1. that means that i need to increase the OSPF link in the core connecting to other DC ? Also I can put a transit link on my top boundary router ie if the primary MPLS link goes down then the traffic will be diver...
I have never seen a senrio where the HO has internet access and BO MPLS!!! Actually some sites will have MPLS/ADSL/3g/4g connections.
I am okay with IPsec tunnel over ADSL and 3g/4g connection, however I am kinda confused IPsec over MPLS and then i...
