Hello,I'm trying (with Cobra) to retrieve some information with the Rest API. I need to retrieve the LLDP neighbors for some leaves. When I'm sending the Get REST with wildcard filter for the dn parameters, I do not receive anything back. But if I'm ...
Hello Everybody,I am doing a design of using Catalyst 9500 as Distribution / Spine and Cat9200 as Access Switch / Leafs. I want to use the same construct as the nexus 9000 => VXLAN encapsulation and BGP EVPN as control-plane.I would like to know if i...
Hello everybody,I have a question regarding the setup of Cisco LMS 4.1 with more than 5000 devices. In the requirements it is written under the soft appliance chapter :"To manage LMS 10,000 devices in LMS 4.1, you must set up more than one servers."(...
Hello,I want to create personal login for the administrators in order they have the same rights as the user "admin" (I want to track them with the ACS later, but now the login method is local). I created an user and set the authorization to "Full Aut...
Hello Kostia, Thanks for your answer. I tried all the possibilites that you mentioned. Unfortunately without success. With the asterisk coding, I receive more object than expected. But If I do a wildcard search with the interface name, I receive the ...
Hello,
I do not have the solution but I was searching the same answer as you. But I can tell you why you do not have the ports with the counter 0 :
Reclaim Unused Up Ports Report
Link and access ports can be queried to generate the Unused Up report...
I already have this kind of problem, but the problem was when the LMS wanted to connect with telnet to the device. For the discovery he just need the SNMP ro.Did you setup the correctly the SNMP ro community for the discovery that is different that t...
Hi,If the seed device is unreachable is normal that the other devices will not be added. If you add it manually, it does not mean that this device is corectly managed by the LMS. You should check the connectivity from LMS to the device and the creden...
Hi,What do you have in the summary of the device discovery ? Are the devices as unreachable or there is nothing ? Unreachable => problem with route or credentialIf you have several IP on the devices, which IP are advertised into CDP ? Is this IP reac...
