Dear,I have an 'strange' question .We have an router with a lot of connected routes (PPPoE Sessions) Too many of this connected routes, we have static routes in place as well.I want to have a backup router which takes over all traffic when one fails....

Dear,I am trying to set-up an MLPPP sessie with an MTU higher than 1500 but without fragmentation. The link between PE and CPE supports MTU upto 1530Concrete situation in testlab is as followingCisco 7200 with NPE-400 acting as BRAS connected to an C...

Dear,I was trying to activate DHCP Option 82 in the SF300 switch, running in Layer-2 mode.In the DHCP Relay Properties, I enabled the DHCP Relay. I also added the DHCP server where the DHCP messages should be relayed.I also added the VLAN were the me...

Dear,Since I am getting very different answers from one to another, I am posting it now in the MPLS map.Is MPLS over PPP supported or not? I have tested it heavily but not get it working. I have put the mpls ip on the Dialer of my CE device (3725) an...

Dear,I am looking for a solution for the following problemWe have a PE router, containing multiple VRF.An CE router is linked to this PE router via ATM-interfaces and is running MLPPP for bundling the lines.Now, the CE router should be able to access...