About joro

joro · 06-18-2012

I have seven locations across the country with their own DID ranges. For an example:LA – (626) 123-XXXXSF – (415) 234-XXXXFR – (559) 345-XXXXwhere XXXX are unique for the system, do not override each other and are used for internal extensions, so DID...

joro · 05-30-2012

The question is:How to backup Cisco ASA-5510 from a Linux server via TFTP?I do know how to backup a switch or a router. Basically creating an access list such as:access-list 55 remark PERMIT hosts requesting TFTP accessaccess-list 55 permit host 172....

joro · 07-15-2019

If that's a NPS server the ports should be auth-port 1812, acct-port 1813instead of auth-port 1645, acct-port 1646

joro · 08-14-2015

Thank you a bunch, Carlo. You saved me hours of digging it out. Greatly Appreciated.

joro · 08-30-2013

Thank you, Steffen Baier.I just made Polycom VVX 500 to work with CUCM 6.1.5. Not a problem following your guide.

joro · 08-30-2013

I've seen the unprovisioned message with SIP phones that were in CallManager but had no DN configured on the phone.

joro · 08-30-2013

I've seen the unprovisioned message with SIP phones that were in CallManager but had no DN configured on the phone.

Member Since	‎12-13-2011 06:31 PM
Date Last Visited	‎07-22-2019 05:20 PM
Posts	23
Total Helpful Votes Received	15

User Statistics

User Activity

Place local calls over MPLS

Backup ASA-5510 from a server via TFTP

Re: Cisco switch and Windows NPS

Thank you a bunch, Carlo. You

Polycom SoundStation IP 7000

Cisco SIP IP Phone are unable to load Config from TFTP (unprovis

Please Help! IP phones Unprovisioned, Can't Ping, Or Register