About Afilias Canada

Afilias Canada · 03-02-2012

Hi,For uplink port channels in 1000v, I am seeing mac-pinning chosen in many best practice guides when used in Cisco UCS. However, I have not been able to find any documentation why mac-pinning is infact better choice than VPC-HM for deploying 1000v...

Afilias Canada · 12-04-2016

Obviously the same destination means longest match can not be used. Also note the use of "if" in his sentence, which indicates a caveat/condition is coming next. "Administrative distance is the first criterion that a router uses to determine which ro...

Afilias Canada · 12-01-2016

'show ip ospf rib' will give you the information you want. Note that '>" indicates whether this route will be installed in the routing table. Not having '>' may be an indication the router has a path to the prefix via another routing protocol with a...

Afilias Canada · 03-05-2012

ThanksRegards,Brian

Afilias Canada · 03-02-2012

Thank you guys. I am trying to see why cdp approach is not recommended. Is there anything that makes it undesirable? I understand this would require a CDP enabled switch and thus not an option when you don't have cdp enabled upstream switch. Th...

Afilias Canada · 12-17-2011

Your best in this case is to remove the nail down route via null 0, the reason is that with the null 0 approach you may end up null routing traffic if your R1-R2 link fails AND your fa2/0 is also down while your BGP upstream link is active.In my opi...

Member Since	‎12-07-2010 01:24 PM
Date Last Visited	‎06-06-2021 04:50 PM
Posts	6
Total Helpful Votes Received	21

User Statistics

User Activity

Why mac-pinning preferred over VPC-HM?

Obviously the same

'show ip ospf rib' will give

Re: Why mac-pinning preferred over VPC-HM?

Re: Why mac-pinning preferred over VPC-HM?

IOS route selection, null vs iBGP