Well I've been experimenting with many things since I last had a moan here, so I thought I'd post an update! Basically, I changed my Cisco WIP 310 settings as below (I'm a Draytel customer, so I'll just use the Draytel examples):Old:SIP Port: 5062 (a...
Hi FolksSome good news for Draytek users; there is new firmware (3.3.7) for the Draytek routers (mine is a 2820vn). This new firmware sorts the registration failures that happen when using a Draytek (so I no longer need to set it to reboot itself eve...
Hi FolksWell I've set my Draytek to automatically reboot every two days, and as well as opening the TCP VoIP port (mine is set to 5062), I've now also opened posts for the UDP 16384~16482 to see if that helps any. Now that I've set the router to rebo...
HiWell I've been using it with a fixed IP address (and on 5070 with the ports opened in my Draytek) and have tried it using OpenDNS for a week and also the fastest and most reliable one shown via DNSBench for a week. It has not experienced the regist...
Hi MartinOthers here have recommended using OpenDNS might be a solution, but I have now tried that and it drops almost every single call after a few seconds. Looking at OpenDNS using GRC's DNS benchmark tool shows that it is not always reachable (I'm...